Allied Seals has a very large selection of bolt seals, and most are certified according to the ISO 17712 standard for C-TPAT use. Below you will see descriptions of each product, but generally all are available with custom printing at no extra charge, and choice of colors (red, orange, blue, green, white, and yellow. Custom colors are also available for larger orders.
ABI High Security Bolt Seal
The ABI Bolt Seal is the finest quality, one-piece molded bolt seal. It is certified according to the ISO 17712 standard, good for C-TPAT shipping and anywhere the certification is required...or you just want real security.
​
-
Standard colors: red, blue, yellow, white, orange, and green.
-
Pin length: 87mm (3.4 inches)
-
Anti-spin design to prevent tampering with high speed tools
-
Materials: Galvanized carbon steel, ABS plastic coating
-
Packaging: 10 pcs per plastic tray, 25 trays per box, 250 seals total
-
Box weight and dimensions: 16.5 kgs (37 lbs), 51cm x 32 cm x 12.5 cm (~20"x13"x5")
-
Applications: All kinds of standard-hasp containers, trucks, etc.
ABII High Security Bolt Seal
This is another top quality one-piece molded bolt seal, certified High Security according to the ISO 17712 standard.
The printing surface is flat, which enables printing of more complicated designs or QR barcodes, and better visibility. The ABS plastic exterior provides extra strength and tamper evidence.
​
-
Standard colors: red, blue, yellow, white, orange, and green.
-
Pin length: 87mm (3.4 inches)
-
Anti-spin design to prevent tampering with high speed tools
-
Materials: Galvanized carbon steel, ABS plastic coating
-
Packaging: 10 pcs per plastic tray, 25 trays per box, 250 seals total
-
Box weight and dimensions: 16.5 kgs (37 lbs), 51cm x 32 cm x 12.5 cm (~20"x13"x5")
-
Applications: All kinds of standard-hasp containers, trucks, etc.
ABST01 High Security Bolt Seal
The ABST01 is a two-piece High Security Bolt Seal, ISO 17712 certified, with full encapsulation of the pin and barrel. The printing on the barrel is protected from abuse by a shell of hard clear ABS plastic. The pin has an anti-spin design to counter attempts at removal by high speed tools.
​
-
Standard colors: red, blue, yellow, white, orange, and green.
-
Pin length: 87mm (3.4 inches)
-
Materials: Galvanized carbon steel, ABS plastic coating
-
Packaging: 10 pcs per plastic tray, 25 trays per box, 250 seals total
-
Box weight and dimensions: 16.5 kgs (37 lbs), 51cm x 27 cm x 12.5 cm (~20"x11"x5")
-
Applications: All kinds of standard-hasp containers, trucks, etc.
IP Bolt High Security Bolt Seal
The IP Bolt is an exceptional-quality bolt seal, certified High-Security according to ISO 17712. The unique two-piece design with a loop on the barrel allows for keeping the two parts together before assembly.
​
-
Standard colors: red, blue, yellow, white, orange, and green.
-
Pin length: 76 mm (3") and 87 mm (3.4 inches)
-
Materials: Galvanized carbon steel, ABS plastic coating
-
Packaging: 10 pcs per plastic tray, 25 trays per box, 250 seals total
-
Box weight and dimensions: 16.5 kgs (37 lbs), 51cm x 32 cm x 12.5 cm (~20"x13"x5")
-
Applications: All kinds of standard-hasp containers, trucks, etc.
Bare Pin bolt seals
For those who want a significant physical barrier without extra customization, we have a full line of bare-pin bolt seals. The pins are 9 mm thick, so they are heavier than the standard 8 mm pins used in most ISO 17712 certified bolt seals. These seals are available in straight and bent-pin configurations, and the come in standard 76 mm (3"), 100 mm (4"), and 150 mm (6") lengths. We also offer both the standard barrel and the IP-type barrel with a loop which serves as a pin holder until the seal is engaged.